Metal - Stamping presses 113

Manufacturer:

All manufacturers

Location:

All locations

Country:

All countries

Year of manufacture:

Technical specification

in T

in mm

in mm

in mm

BIHLER MACH05, 1975

€55,000

Year: 1975

LOCATION: Ukraine

€55,000


Type:Mechanical
Table length: -
Ram stroke: -
Power in tons:25 T
Table width: -
Nbr of strokes/min:450
Bruderer BSTA 20 Stamping press

€41,800

Year: 1982

LOCATION: Serbia

€41,800


Type: -
Table length:560 mm
Ram stroke: -
Power in tons:20 T
Table width:400 mm
Nbr of strokes/min:1800
Kosice-Schuler A2-200/360 Stamping press

€28,900

Year: 1990

LOCATION: Lithuania

€28,900


Type: -
Table length:1350 mm
Ram stroke: -
Power in tons:200 T
Table width:1100 mm
Nbr of strokes/min:350
Ussr КБ3534А Cold forging machine

€44,000

Year: 1986

LOCATION: Ukraine

€44,000


Type:Mechanical
Table length:2500 mm
Ram stroke: -
Power in tons:250 T
Table width:1250 mm
Nbr of strokes/min: -
Used Eitel RZ 400A Stamping press

€39,800

Year: 1971

LOCATION: Poland

€39,800


Type:Mechanical
Table length:2000 mm
Ram stroke:300 mm
Power in tons:400 T
Table width:1250 mm
Nbr of strokes/min: -
Jelsingrad BPA-90 Stamping press

€11,900

Year: 1987

LOCATION: Poland

€11,900


Type:Mechanical
Table length:1200 mm
Ram stroke:140 mm
Power in tons:90 T
Table width:660 mm
Nbr of strokes/min:450
Hwail HCA-110 Stamping press

€35,700

Year: 2011

LOCATION: Russia

€35,700


Type: -
Table length: -
Ram stroke: -
Power in tons:110 T
Table width: -
Nbr of strokes/min: -
Hwail HCA-160 Stamping press

€41,200

Year: 2011

LOCATION: Russia

€41,200


Type: -
Table length: -
Ram stroke: -
Power in tons:160 T
Table width: -
Nbr of strokes/min:45
Liye MX-25 Stamping press

€10,900

Year: 2003

LOCATION: Taiwan

€10,900


Type:Hydraulic
Table length:540 mm
Ram stroke: -
Power in tons:25 T
Table width:300 mm
Nbr of strokes/min:800
«Banning» ARA 1600 Stamping press

€71,500

Year: 1984

LOCATION: Belarus

€71,500


Type:Hydraulic
Table length:1550 mm
Ram stroke:580 mm
Power in tons:1600 T
Table width:1850 mm
Nbr of strokes/min:20
Fromm 9 Ton Stamping press

€49,500

Year: 2009

LOCATION: Italy

€49,500


Type: -
Table length: -
Ram stroke: -
Power in tons: -
Table width: -
Nbr of strokes/min: -
Voronezh K2549 Stamping press

€23,400

Year: 1980

LOCATION: Russia

€23,400


Type: -
Table length: -
Ram stroke: -
Power in tons: -
Table width: -
Nbr of strokes/min: -
Italpresse A 500 Stamping press

€66,000

Year: 2003

LOCATION: Italy

€66,000


Type:Hydraulic
Table length: -
Ram stroke: -
Power in tons:500 T
Table width: -
Nbr of strokes/min: -
OMF A COLLO DI CIGNO Stamping press

PRICE ON REQUEST

Year: ~1999

LOCATION: Italy

PRICE ON REQUEST


Type: -
Table length: -
Ram stroke: -
Power in tons: -
Table width: -
Nbr of strokes/min: -
Pressl SL160 Stamping press

PRICE ON REQUEST

Year: ~2001

LOCATION: Czech Republic

PRICE ON REQUEST


Type:Hydraulic
Table length:1900 mm
Ram stroke: -
Power in tons: -
Table width:1500 mm
Nbr of strokes/min: -
Hydromec HF 2500 Stamping press

PRICE ON REQUEST

Year: ~1999

LOCATION: Italy

PRICE ON REQUEST


Type:Mechanical
Table length:760 mm
Ram stroke:300 mm
Power in tons:250 T
Table width:760 mm
Nbr of strokes/min:50
PRESSIX 50 CNR 4 Stamping press

PRICE ON REQUEST

Year:

LOCATION: France

PRICE ON REQUEST


Type:Mechanical
Table length:770 mm
Ram stroke: -
Power in tons:50 T
Table width:530 mm
Nbr of strokes/min:90
Bruderer BSTA 800-145B Stamping press

PRICE ON REQUEST

Year: 2007

LOCATION: India

PRICE ON REQUEST


Type:Mechanical
Table length:1430 mm
Ram stroke: -
Power in tons:80 T
Table width:910 mm
Nbr of strokes/min:750
Galdabini RPRI/160 Stamping press

PRICE ON REQUEST

Year: 1990

LOCATION: Italy

PRICE ON REQUEST


Type:Hydraulic
Table length:910 mm
Ram stroke:650 mm
Power in tons:160 T
Table width:710 mm
Nbr of strokes/min: -
Hwail HCS-300 Stamping press

€148,000

Year: 2011

LOCATION: Russia

€148,000


Type: -
Table length: -
Ram stroke: -
Power in tons:300 T
Table width: -
Nbr of strokes/min: -
Purchasing a used stamping press can offer value for money and a greater range of products to chose from when compared with the market for new presses. However, the increased variety of stamping presses on the used equipment market can make the purchase decision more challenging.

Factors such as machinery age and running hours, not applicable on a new machine purchase, add to the complexity already inherent in a stamping press purchase. To begin, detail your requirements - final product dimensions, weight etc. - and match these to specifications for your stamping press, including:
  • Tonnage rating - most fall in the 40 - 1000 ton range, not to be confused with energy generated by flywheel or equipment weight
  • Dimension of bed/table
  • RPM (revolutions per minute)
  • SPM (strokes per minute)
  • Drive power
  • Slide stroke
The variety of used stamping presses available is also increased due to customization and supplementary components which are often present in used machines. These deviations from the original manufacturer's specification can often be omitted from a used equipment description and have a profound impact on press performance. The following questions cover some examples where stamping press customization should be investigated prior to purchase:
  • Is a die holder/cushion included?
  • Is an automatic lubrication system included?
  • Are all electrical controls in working order?
  • What is the weight of the press?
  • What are the dimensions of the press?
Having established a comprehensive set of requirements and matched these to the specifications of a used stamping press, it is important to verify the information provided in a production demo. This is ideally performed in person, but in the case of international purchases many buyers rely on a video of the machine in operation.
Purchasing a used stamping press can offer value for money and a greater range of products to chose from when compared with the market for new presses. However, the increased variety of stamping presses on the used equipment market can make the purchase decision more challenging.

Factors such as machinery age and running hours, not applicable on a new machine purchase, add to the complexity already inherent in a stamping press purchase. To begin, detail your requirements - final product dimensions, weight etc. - and match these to specifications for your stamping press, including:
  • Tonnage rating - most fall in the 40 - 1000 ton range, not to be confused with energy generated by flywheel or equipment weight
  • Dimension of bed/table
  • RPM (revolutions per minute)
  • SPM (strokes per minute)
  • Drive power
  • Slide stroke
The variety of used stamping presses available is also increased due to customization and supplementary components which are often present in used machines. These deviations from the original manufacturer's specification can often be omitted from a used equipment description and have a profound impact on press performance. The following questions cover some examples where stamping press customization should be investigated prior to purchase:
  • Is a die holder/cushion included?
  • Is an automatic lubrication system included?
  • Are all electrical controls in working order?
  • What is the weight of the press?
  • What are the dimensions of the press?
Having established a comprehensive set of requirements and matched these to the specifications of a used stamping press, it is important to verify the information provided in a production demo. This is ideally performed in person, but in the case of international purchases many buyers rely on a video of the machine in operation.
Purchasing a used stamping press can offer value for money and a greater range of products to chose from when compared with the market for new presses. However, the increased variety of stamping presses on the used equipment market can make the purchase decision more challenging.

Factors such as machinery age and running hours, not applicable on a new machine purchase, add to the complexity already inherent in a stamping press purchase. To begin, detail your requirements - final product dimensions, weight etc. - and match these to specifications for your stamping press, including:
  • Tonnage rating - most fall in the 40 - 1000 ton range, not to be confused with energy generated by flywheel or equipment weight
  • Dimension of bed/table
  • RPM (revolutions per minute)
  • SPM (strokes per minute)
  • Drive power
  • Slide stroke
The variety of used stamping presses available is also increased due to customization and supplementary components which are often present in used machines. These deviations from the original manufacturer's specification can often be omitted from a used equipment description and have a profound impact on press performance. The following questions cover some examples where stamping press customization should be investigated prior to purchase:
  • Is a die holder/cushion included?
  • Is an automatic lubrication system included?
  • Are all electrical controls in working order?
  • What is the weight of the press?
  • What are the dimensions of the press?
Having established a comprehensive set of requirements and matched these to the specifications of a used stamping press, it is important to verify the information provided in a production demo. This is ideally performed in person, but in the case of international purchases many buyers rely on a video of the machine in operation.

Don't miss your next machine!


Enter your email address to receive monthly updates when the best machine deals enter the market.

  • Selected offers for your market
  • Machines from factories and auction sales
  • 100% free

No spam - Unsubscribe anytime